Entering a Sales Invoice

Sales invoices are entered the same way as sales orders, except that an invoice is processed. If a sales order exists for the invoice that you wish to process, locate the sales order (Review the Viewing and Editing Sales Orders section for more details) and make the appropriate changes described below and then process the sales order to create a sales invoice.

The invoice window has its own pull-down menu that is used within the invoice and will be referred to as the invoice menu throughout this section.

Invoice detail can be entered so that it is shown or hidden on the printed invoice. Review the Materials List section for more details on how to enter invoice detail but not show it on the printed invoice.

Entering and Printing an Invoice

  1. Go to Sales > Invoices and S.O.s, and the following window will appear. Note that this same window is used to enter sales orders.

  2. Type the customer ID in the Customer ID field or select one from the selection window. Complete the following steps to change the Customer ID from another customer.

    1. Select Edit > Change Customer from the invoice menu to open the following dialog:

    2. Enter the new Customer ID into the New Customer entry or click New to create a new customer record.

    3. Set the desired optional processes that change invoice data such as Recalculate prices, Change terms..., or Change billing and shipping customer addresses.

    4. Click Finish to change the Customer ID within the sales invoice to a new customer ID.  Press the tab key to move from the Customer ID entry to the invoice field if no sales orders exist. If sales orders do exist for the current customer, the following dialog will appear:

      Highlight the sales order to edit or process and click the Yes button. To enter a new sales order or invoice, click No.

  3. Tab through the Invoice field to auto-generate the sales order number.

  4. Enter the Ship To customer ID if the products are being shipped. To manually edit the Ship To name and address, blank the Ship To ID and press tab on your keyboard. The Ship to tab will automatically show allowing the user to change the shipping address. The Ship To field defaults to the ID specified in the Sales > Customers > Terms tab > Ship To ID. Note that the shipping address will not be printed on the invoice unless the Ship Via field is changed. The Ship To entry determines the sales tax rate if the item is being shipped. Review the Sales Tax Overview and the Calculating Freight Charges on Sales Invoice for more details.

  5. The invoice Date will default to today's date each time a sales order is opened or a new invoice is being entered.

  6. A Shipping tab may appear in the upper right corner of the sales order. This tab contains various shipping options and shipping details. Review the Freight and Shipping Charges > Calculating Freight Charges on a Sales Invoice section.

  7. A Serial No tab may appear to attach an equipment serial number or a vehicle VIN number.   Review [Inventory] Serialized Item > Attaching a Vehicle to sales Invoice for more details on attaching equipment or vehicles to a sales order.  

  8. Select the payment method and enter any term information. Review the Payment Methods and Terms section for details for each payment method or charge terms.

  9. The Sales Person field should reflect the sales person who entered and processed the invoice. This entry can be used to process commissions. Review the Salesperson Commissions documentation for more details. To default this field to the user name used in the EBMS Login process, turn the Default sales person to user name switch ON in Sales > Options > Invoice/S.O. tab - User Preferences.

  10. Enter the customer's PO# (Purchase Order) for this invoice. Keep the field blank if no purchase order is used.

  11. Enter the Ship Date the invoice products were shipped. Ignore this field if the customer picked up the invoice items or the service was rendered in-house.

  12. The Ship via is used to specify the method of shipment and defaults to the pickup code recorded in Sales > Customer > Terms tab  Standard Shipping Method (FOB). If this code is changed to anything besides the default setting, the sales order will print the Ship To name and address on the printed invoice, and automatically calculate Freight charges. The Freight charge will be calculated only if the total of the sales order is below the Minimum Free Freight amount entered in Sales > Customers > Terms tab. To view the Freight charge amount, go to View > Advanced Options Freight Charge field, which is copied from the Sales > Customers > Terms tab when a sales order or invoice is created. If the freight charge is manually changed on the invoice, the Freight Charge amount will be zeroed in Advanced Options, and the Freight amount will no longer be calculated automatically.

  13. The Price Level field defaults to the price level specified for the customer entered in Sales > Customers > General tab > Price Level field. This setting is used to set the appropriate inventory pricing on the sales invoice. See Inventory > Product Catalog > Pricing tab to view or set the different sale prices for each inventory item. To permanently change the Price Level setting for a customer, go to Sales > Customers > Terms tab.

  14. Enter the invoice detail using as many lines as needed.

    1. Enter the quantity the customer Ordered. The Ordered quantity is recorded in the Count tab of the inventory item if an inventory item is entered.

    2. The Shipped field should reflect the amount that the customer received and the invoice total will be calculated by this quantity. If the Shipped amount is less than the Ordered amount and the Create backorders automatically switch is on, a new sales order will be created for the balance amount that has not been shipped. Go to Sales > Options > Invoices and S.O.s tab to set the Create backorders automatically when processing a sales orders option. The amount ordered on the backorder would be the total amount ordered less the amount shipped to date.

    3. Enter the Inventory item ID code. The Description, Cost, Taxable switch and G/L code will automatically be filled in from the information entered in Inventory > Inventory Items.  Alternative codes such as a lot number, serial number, UPC codes, and manufacturer Part No can be entered into this column.  Products that are not included in the product catalog can be accessed from the vendor catalog.  Review [Inventory] Multi-Vendor Catalogs > Creating Inventory Items from a Vendor Catalog for instructions to conveniently insert an item into the catalog and the invoice.

    4. The Unit of Measure field is an optional field that identifies the unit of measure being used for this inventory item. Review the Tracking Counts > Unit of Measure section of the inventory documentation for more details. If multiple units of measure are never used for any inventory items, ignore this field. Review the section on Features > Column Appearance section of the main documentation for details on removing this column from the invoice window.

    5. The Unit Weight field is an optional field that can be set for each inventory item in Inventory > Product Catalog > General tab > Gross Weight field. Ignore this field if weights are not used. Review the section on Features > Column Appearance section of the main documentation for details on removing this column from the invoice window.

    6. Weight - This is the total weight for this line in the invoice. It equals the Shipped column amount times the Unit Weight. Review the section on Column Appearance for details on removing this column from the invoice window. Review the Freight and Shipping Charges > Calculating Total Weight section for more details.

    7. The Description field describes the item being sold and will be printed on the sales invoice. If the item doesn't have an inventory code, leave the Inventory item field blank and manually type a Description of the item being sold. To type more than one description line on the invoice, leave Ordered, Shipped, and Item fields blank on the following lines and type the notes in the description column. Rather than typing in a description line each time you invoice for a specific service or non-inventory item, create a new "inventory item" and set the inventory Classification as Service. See Using Inventory to Bill for Service Rendered for more details on how to use the inventory system to save data entry time when entering sales invoices.

    8. Enter the sale price of the item. Note that when you enter an inventory item, a price is copied from the inventory record based on the price level but can be changed anytime before the invoice is processed. This Price amount is used to calculate the extended amount and the invoice total. Amount = Shipped * Price.

    9. The Amount field will automatically be calculated from the Quantity Shipped entry and the Price.

    10. If the Taxed column is checked, sales tax will be calculated using the Tax table setting located at the bottom of the sales order. If the Tax table is set to EXEMPT the Taxed check mark will not have any effect on the Tax amount and can be ignored.  

    11. Enter the correct revenue G/L Code. This field automatically defaults to the general ledger code that has been set for the specified inventory code (Inventory > Advanced tab). This code can be changed manually for this specific invoice.

    12. The Cost amount will equal the total perpetual cost if a track count Item was entered and the Inventory Method was set to Perpetual. Go to Inventory > Options > General tab to set the Inventory Method. If the Inventory Method is set to Periodic, it is recommended that the cost column be hidden. Right-click on the Cost column heading and click the Cost option to hide the column. The profit of a detail can be calculated by subtracting the cost from the extended price.
      Sales detail can be entered into a sales invoice using POS tools such as barcode scanners, signature devices, payment terminals, or weigh scales. Review the Point of Sale > Getting Started > Point of Sale Devices section for details on configuring these devices.
      A scale can be connected to EBMS to sell inventory items based on weight. Review the Point of Sale > Advanced Tools > Weigh Scale Interface section for more details.
      It is recommended that you adjust the widths of the invoice detail columns to your preferences. Review the section on Features > Column Appearance section of the main documentation for details on removing this column from the invoice window. Repeat the steps listed above for each invoice detail line.
  15. The sales tax table is used when calculating the sales tax amount. Go to View > Sales Taxes to change the sales tax table settings. This entry will display Multiple if multiple sales tax settings are applicable.
    The sales Tax is automatically calculated based on the total taxable (all detail lines that have the Taxable column checked) and the Tax table setting. The sales tax amount can be manually altered within the View > Sales Tax dialog. Review the Sales Tax > Changing the Tax Rate Within a Sales Invoice section for more details. The only reason to manually change the Tax amount is if the tax has manually been calculated on a hand written invoice, and the tax was rounded to a slightly different tax amount.
    __________________________________________________________________________________________________________________________________________________________
    NOTE
    :  The discount will be deducted from the total when calculating sales tax. Taxable sales = taxable sales discount. If the Payment method is set to charge, the taxable sales = total taxable sales and the discount is ignored.
    ___________________________________________________________________________________________________________________________________________________________
  16. Enter any Freight charges that need to be added to the invoice. This charge is automatically calculated if the Ship Via entry does not equal the Standard Shipping Method (FOB) within the Sales > Customer > Terms tab. This setting (FOB) comes standard in EBMS. The FOB setting assumes that the items are being picked up or service was rendered. This can be changed on any sales invoice. If a customer always gets items shipped, it may be helpful to change the Standard Shipping Method (under Sales > Customer > Terms) to UPS or something similar. See the Calculating Freight Charges on Sales Invoices section for more details. The Freight charge will be calculated only if the total of the invoice is below the Minimum Free Freight amount entered in Sales > Customers > Terms tab. To view the Freight charge amount, go to View > Advanced Options > Freight Charge field that is copied from the Sales > Customers > Terms tab when a sales order is created. If the freight charge is changed on the invoice, the Freight Charge amount will be zeroed in Advanced Options so the Freight amount will no longer be calculated automatically.
  17. Enter a cash discount amount for the invoice if the invoice is paid within terms. A discount will automatically be calculated if the invoice discount terms are set. Note that if you manually enter a discount amount in the discount field, the discount terms on the invoice will be erased. Discounts can be calculated for all or part of the invoice using the percentage discounts inventory classification. Review the Inventory Items > Using the Inventory Module for Non-Inventory Items > Discounts from the Inventory Documentation for more details.
  18. The Finance Charge amount is automatically updated when customer finance charges are updated on overdue invoices but it can be changed anytime before the invoice is paid in full. This value can also be changed in the Sales > Customer Payments window. Review the Discounts and Finance Charges section for more details.

  19. To add or edit an invoice note or Memo, go to the invoice menu option View > Memo. This memo can also be seen on the upper right corner of the invoice window if the screen size is large enough.

  20. To view or edit advanced invoice settings, select invoice menu option View > Advanced Options and the following window will appear.
    The Freight, Finance Charges, Customer Discounts, Accounts Receivable, and Customer Down Payment fields are general ledger accounts that are copied from the customer's Advanced tab. These codes normally will not need to be changed.
    The Freight Charge is copied from the Sales > Customer > Terms tab and is used to calculate freight charges automatically. This field is blanked if the Freight amount is changed on the invoice foster.
    The Due Date and Discount Date are calculated from the terms field. These dates cannot be changed without changing terms. Click OK to save advanced options and return to the invoice window.

  21. To process and print the invoice, go to Process > Process and Print using invoice menu selection or press Ctrl + P on the keyboard. A copy of the invoice will print. Review the Printing a Sales Invoice or Payment Receipt section for more details on configure the invoice form.

  22. If no invoice is to be printed, go to Process > Process/No Print or press Ctrl + R on the keyboard.

  1. To print an invoice or sales order without processing it, select invoice menu File > Print and select the appropriate report.

  2. If the invoice payment type is Charge or COD, the invoice will appear in the Sales > Customer Payments window. If the invoice was set as cash, no additional processing is needed for this invoice.

To enter another invoice, select File > New or press Ctrl + N  on the keyboard and the system will prompt you to save the invoice.

A sales order or invoice can be created using a recurring billing proposal using the optional Recurring Billing module. Review the Sales > Recurring Billing > Recurring Billing Overview section for more details on this feature.

Review the Inventory Items > Sales Activity section of the inventory documentation for details on how to get a list of invoices that contain a specific inventory item.