Rental Pricing

Rental pricing is configured within the rental service product code.  The rental system uses the price tools within the product catalog to create the base rental pricing.   

Creating Pricing Formulas

Complete the following steps to configure rental pricing:

  1. Open a service inventory code classified as a rental service code.  Review the Creating Rental Service Codes for details on creating the rental service item.

  2. Click on the Count tab of the service item as shown below:

  3. The Main Unit setting must always be set as Day.  All rental periods are calculated from a day.   All units of measure (UOM) smaller than a day are based on the average hours per day.  All UOM larger than a day are based on the average number of days open.   For example, a company that is open 6 days a week would use a 6 day week and not 7.  A four week month which is common would equal 24 days (4, 6 day weeks).  

  4. Use the following grid to create a unit of measure for each . Click on the Add button and enter the standard unit of measure for each rental period option. All hourly unit of measure settings should equal the Hours in Day value (found in Rental > Options) divided by the hours of the unit of measure. For example, an hour unit of measure with a Hours in Day value of 10 would be 10. The following examples may be applicable for rental service items:

    Unit of Measure

    Smaller / larger

    Divisor / Multiplier of the main UOM - Day

    2 Hour

    Smaller

    5 (since a day is 10 hours)

    1/2 Day

    Smaller

    2

    Day

    Main UOM

    This UOM is not shown on the UOM list since it is the Main Unit

    Week

    Larger

    6 or the average open days.  This multiplier affects history. Each time the item is rented for a week, the total rentals (on history tabs) will be incremented by this number.

    Month

    Larger

    24 or average open days per week x 4

  5. Set the Default selling unit to the unit of measure that is the most common rental period. Click on the Pricing tab to review the rental pricing.

  6. A pricing record will appear for each time period or Unit-of-measure. The rental pricing must be set for each time period within each Price Level. The price levels that are not used within the rental system can be kept blank or ignored. The user can set the Formula setting to (None) and manually set the Price for each time period. The example shown above sets the daily rental price within the Base Price entry. The Formula settings can be used to translate the daily price to the pricing for other rental time periods.  For example, the 1/2 Day Formula is set to Add 25 %. The calculation for the Price of the rental period is Base Price ($65.00) / 2 (UOM divisor) * 25% (Formula setting) = $40.95 (Rounded using the rounding table).
    Another example: The Week pricing is calculated by using the following formula: Base Price ($65.00) * 6 (multiplier entered in the Week UOM) 25% (Add – 25% formula) = $295.00 (rounded using the rounding table)

Review the following sections within the main EBMS manual for more details:

Max Hours or Micrometer

Enter a Max Hours or Max Micrometer if the equipment contains a maximum amount of equipment use time within the rental period. If there are values within these columns, the Check In and Return All processes within the rental contract will prompt the user to record the hour meter and micrometer settings. The pricing will be adjusted if the rental exceeds the Max Hours or if Max Micrometer is exceeded.  Review Micrometer and Hour Meter Maximums for maximum details.

Changing UOM Pricing Options Automatically

EBMS will use a specific UOM (unit of measure) until the pricing of the next largest UOM is the same price or cheaper. For example, the system will use the daily UOM for a multiple day rental until the weekly rental is cheaper. Fractional UOM settings such as 1/2 day must be set properly so that the quantity is not a fraction.

Test Pricing

Use the following steps to test pricing to verify that the price options are properly set:

  1. Launch the rental contact window by selecting Rental > Contract from the main EBMS window.

  2. Enter a rental item into the contract. Review the Creating a Contract section for details on creating the contract.

  3. Check out and return the rental item. Review the Reserving and/or Checking Out a Rental and the Returning and Invoicing a Rental sections for more details on checking out and returning a rental item.

  4. Evaluate the Quantity value at the beginning of the contract and the Rate and Total rental cost. Right-click on the rental item detail line and select Explain Rental Charge.

  5. The dialog will display the steps the software took to arrive at the rental rate as shown below:
    :
    Review the pricing exceptions and grace period settings to configure the rate to match the desired price. Contact your EBMS customer service representative if there is additional assistance required for rental pricing.

  6. Right click on the rental line and select View Rate Table to view or change rental rates.   Note that rates can be changed per rental contract within the Rate Table.