Basic Functionality
Command Index:
Up Arrow Scroll Up
Down Arrow Scroll Down
* Log Out/Reset
BK Backspace (to erase a character that you typed)
Note – the function FN key does not work like a shift key, but more like a Caps Lock key. Press the FN key and an image will appear in the lower left hand corner of the scanner display. This means the next key that is pressed will have an alternate function as shown below:
FN + 7 Send the saved data (requires connection)
FN + 6 Process the current order
FN + 5 Go to the SELECT A MODE Menu
FN + 2 Print the current Order
FN + Up Arrow Switch Types – between History and Counts (Inventory Mode)
FN + Down Arrow Switch Prompt
FN + Enter Change Contrast (use the arrows, any key to exit)
FN + BK Turn on the Scanner’s backlight
Input letters or characters into the scanner
To type letters or characters (other than numbers) using the Scanner follows these steps.
Press and hold the button that contains the letter/character to be entered.
Press the scanner trigger until you see the character you wish to type.
To type numbers, simply press the button with the corresponding number on it.
Press the Enter button on the Scanner to input the typed data.