General Setup Instructions  

Auto Send e-mail and system settings must be configured before using the module. Global options should be set before using the Auto Send module is used even if user options are configured.  Reference the following User Settings instructions for user specific settings in addition to the global settings.   Do not use the Auto Send feature until the following settings are properly configured.  Communicate with the company IT staff or a Koble Systems representative for additional technical assistance.

Default Global Settings

Select File > Auto Send Options > General  to open the following global options.  These options allow the user to customize the content of the documents. Options to receive summaries or copies or to prompt the system to generate log files are configured within this dialog.

Complete the following E-mail Settings:

  1. The Export Folder must be mapped to a valid computer path. This setting will default to %Temp%\AutoSend.  %Temp% identifies the current users temporary folder.  This directory will contain document copies and log files. Review the Test Mode section for more details on the log files.

  2. The Mail Server setting must reflect the network address or server name of the network E-mail server. Use the SMTP address when using the Microsoft Exchange Server.

  3. The From Address should contain a valid e-mail address that will receive responses from the Auto Send e-mail message. This setting is used only when e-mail is using the SMTP protocol. Note that any E-mails that fail to deliver will be returned to the From Address. The From Address is required for SMTP e-mail send processes. Using an e-mail alias is recommended rather than using a specific person's e-mail address.

  4. The SMTP Port should be set per e-mail service providers specifications.

  5. Select the proper SSL/TLS encryption setting.  Select None to disable.

Complete the following System Settings:

  1. Enter the Local Area Code. This value will be prefixed to seven digit fax numbers.

  2. Enable the Use an E-mail to Fax system option only if an e-mail to fax system is available.

  3. An E-mail to Fax Domain setting must be entered if the Use an E-mail to Fax system option is enabled.

User Settings

The user settings for the current user are optional.  Any setting that is left blank will default to the setting entered within the General setting tab.  

  1. The Export Folder must be mapped to a valid computer path. This setting will default to %Temp%\AutoSend.  %Temp% identifies the current users temporary folder.  Keep this

  2. The Mail Server setting reflects the network address or server name of the network E-mail server used by the current user.  This setting should only be populated if it differs from the default setting in the general tab.  

  3. The From Address may contain the optional current user's e-mail address that will receive responses from the Auto Send e-mail message. This setting is used only when e-mail is using the SMTP protocol. Note that any E-mails that fail to deliver will be returned to the From Address. The From Address is required for SMTP e-mail send processes.

  4. The SMTP Port should be set per e-mail service providers specifications.  Enter an optional Email Address for the current user.

  5. Select the proper SSL/TLS encryption setting.  Select None to disable

  6. Review Test Mode for Test Settings details.

Other Settings

Continue with the following Auto Send configuration sections for setting details for each process as shown below: